Suzhou Kanglaituo Industrial Equipment Co., Ltd.
Address: No. 177 Pu Pu Road, Zhangpu Town, Kunshan City, Jiangsu Province
With the development of mechanical equipment, green energy is particularly important, Suzhou Rally testing machine also set foot on the green road, in the energy-saving emission reduction green development on the road, the future direction of development is:
1, the operation speed is higher;
2, the service life is longer and longer;
3, effective energy conservation and cost;
4, effectively reduce the working temperature, reduce energy consumption;
5, in the use of environmentally friendly lubricants on the basis of accept the heavier load;
Tensile testing machine to be equipped with the conditions:
1) Testing the rubber requires a large trip
As the deformation of rubber in the deformation of a large amount, especially latex products, elongation may be as high as more than 1000%. Therefore, before the rubber sample is broken, it is necessary to ensure that the gripper of the rubber tension tester has sufficient travel.
2) high precision and high frequency data acquisition
Stretch rubber does not require a lot of force, pull the measurement range does not need a lot, so the need for high precision value. The general requirements of the test machine can be obtained after the decimal point more than two precision value. Suzhou high-quality rubber tensile testing machine to achieve the accuracy of ± 0.5% or less. In addition, the tensile strength of each test section is very important for the success of the test, because the tensile test can not be repeated because the tensile strength of the rubber is required to be measured.
Metal Rally Function and Function:
The computer display shows the test process, curve, computer automatic transmission test setup and test data. Users can modify the test report according to their own requirements, the output standard report. Through the group test curve of the superposition of analysis, can accurately grasp the quality control parameters. Multi-way data query function, which allows managers to clearly grasp the development trend of quality control trends. Specially designed software features make the experimenter more quantitatively grasp the state parameters of the key points during the application of the test material, and accurately perform the process adjustment and production control.
According to the purpose of the test and the different test materials, electronic tensile testing machine tensile speed is also different, so the load has a certain speed range. The change of the loading speed is to change the contact position on the friction wheel by turning the handle, causing the gear to rotate the sector gear, and the connecting rod and the block, which is fixed with the sector gear, To achieve the next chuck movement of the infinitely variable speed. There are two steps in the stepless speed range of 10 to 30 mm per minute when the triangular belt is set in the small sheave of the motor Rally motor pulley; the speed is 30 to 90 mm per minute when set in the large slot.